Home Products Sales Offices About Us
   
   TS-150 
   TS-140 
   TS-300 
   TS-200 
   AVI-350-S 
   AVI-350-M 
   AVI-400-S 
   AVI-400-M 
   Accessories 

These easy to install isolators protect delicate high resolution measurement instrumentation against disturbing influences such as building vibrations and forces introduced directly into the equipment by the operator.
Frequency 1,2 -  200 Hz
Load range 0  - 400 kg ( per unit )
Dimensions 720x190x115mm

The  basic configuration of the AVI 400-M includes two compact units and one control unit and isolate actively up to a max. load of 800 kg. Support of higher loads can be easily achieved by increasing the number of compact units. To adapt the AVI 400-M to user specific applications, compact units in different lengths are available   

The isolation of AVI 400-M begins at 1,2 Hz, increasing rapidly to      35 db beyond 10 Hz

The lack of any low frequency resonance means much better performance than with common passive air damping approaches

The inherent stiffness of the AVI 400-M systems imparts excellent directional and positional stability

The outstanding performance      of the AVI 400-M includes all six translational and rotational vibration modes

Transmissibility curve

The AVI 400-M compact units  do not require any large tools for installation.
We strive to offer an easy,  user friendly handling concept -  thus avoiding any complicated procedures when placing a heavy device (e.g. an SEM)  on the units

Technical Specifications

Isolation:

dynamic 1,2 Hz to 200 Hz passive beyond 200 Hz

Transmissibility:

see attached curve   Above 10 Hz trans- missibility < 0,017 (-35db)

Correction Forces:

max. horizontal 8 N             max. vertical 16 N

Static Compliance:

approx. 1.75 µm/N vertical and 3.5 µm/N horizontal

Maximum Load:

800kg
 single unit: 400 kg

Size:                  ( single unit )

600-720 x 190 x 115mm    

Weight:

20 kg  - (single unit)

Electrical

 

Safety class:

1

Power Consumption:

typically 20 W ,   maximum 50 W (70 VA)

Input Voltage:

115 - 230 V  AC +/- 10% , 50 - 60 Hz

Overload:

16 LEDs indicate overload in input and output stages

Monitor signal:

A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation -For diagnostic purpose only -

To download detailed information please click.
 Instruction Manual AVI-400-M as pdf

AVI 400-M single unit

AVI 400-M Basic configuration:  Two double units with one control unit

  

AVI 400-M  - ( two double units)        with Scanning Electron Microscope    LEO “Supra 35”

 

www.tablestable.biz - © 2005 - webdesign by www.poweryourpoint.com