The  isolation of the  TS-140 begins at 0,7 Hz,  increasing rapidly to 40db beyond 10Hz

The lack of any low frequency resonance means much better performance than with most common passive air damping approaches

The inherent stiffness of the      TS systems imparts excellent directional+positional stability

The outstanding performance of the TS 140 includes all six translational and rotational vibration modes

The precise automatic height adjustment mechanism stabilizes the top plate at an optimized working level even after major changes of load

A remote control allows the isolation to be switched  “ON” and “OFF” externally

Isolation:

dynamic 0,7Hz to 1 kHz passive beyond 1 kHz

Transmissibility:

see attached curve   Above 10 Hz trans- missibility < 0,01 (-40dB)

Correction Forces:

Maximum +/- 4 N in any direction

Static Compliance:

approx. 12 µm/N vertical
approx. 30-40 µm/N
horizontal

Maximum Load:

140 kg

Size:

500 x 600 x 85 mm

Weight:

23 kg

Electrical

Safety class:

1

Power Consumption:

typically 10 W ,   maximum 50 W (70 VA)

Input Voltage:

115 - 230 V  AC +/- 10% 50 - 60 Hz

Overload:

The display indicates when the load is too heavy or severely unbalanced

Monitor signal:

A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation - for diagnostic purposes only

Front panel Display menu:

Displays instrumental status including:                  - height adjustment
- isolation ON / OFF
- overload
- transportation locking
- technical hot-line

Table top

Size:

500 x 600 mm

Material:

Damped Aluminium sandwich construction
Also available with tapped M6 on 25mm
or customised