The isolation of the TS 200-M begins at 1,0 Hz,  increasing rapidly to 40 dB beyond 20 Hz

The lack of any low frequency resonance means much better performance than with most common passive air-damped systems

The inherent stiffness of the  TS systems imparts excellent directional and positional stability

The outstanding performance  of the TS 200M includes all six translational and rotational vibration modes

The precise automatic height adjustment mechanism stabilises the top plate at an optimised working level even after major changes of load

A remote control allows the isolation to be switched  “ON” and “OFF” externally

Frequency          1,0 - 1000 Hz Load range         0    -   800 kg (basic configuration with 4 units) Dimensions 210 x 210 x 145 mm (single unit)

Isolation:

dynamic 1,0 Hz to 1 kHz passive beyond 1 kHz

Transmissibility:

see attached curve   Above 20 Hz trans- missibility < 0,01 (-40dB)

Correction Forces:

Maximum +/- 8 N in any direction

Static Compliance:

approx. 12 µm/N vertical and 30-40 µm/N horizontal (per single unit)

Maximum Load:

800 kg -                                    200 kg per single unit

Size:

210 x 210 x 145 mm -           (single unit)

Weight:

5,5 kg -  (single unit)

Electrical

Safety class:

1

Power Consumption:

typically 10 W ,   maximum 50 W (70 VA) for 4 units

Input Voltage:

115 - 230 V  AC +/- 10% , 50 - 60 Hz

Overload:

The display indicates when the load is too heavy or severely unbalanced

Monitor signal:

A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation - for diagnostic purpose only

Front panel Display menu:

Instrumental status accessible byscrolling:          - height adjustment             -3-axis vibration display    - isolation ON / OFF             - overload                               - technical hot-line

Table top

Size:

Determined by application